DURANEX<\/p>\n
Daicel HPP<\/p>\n
| Property<\/th> | Grade<\/th> | Density (g\/cm3)<\/th> | Flexural modulus \n(MPa)<\/th> | Strain at break (%)<\/th> | Charpy notched impact strength \n(KJ\/m2)<\/th> | HDT \n(1.8 MPa)<\/th> | Note<\/th>\n<\/tr>\n<\/thead>\n |
|---|---|---|---|---|---|---|---|
| Pure resin<\/td> | 2002<\/td> | 1.3<\/td> | 2630<\/td> | 50<\/td> | 3.4<\/td> | 70\u00b0C <\/td> | <\/td>\n<\/tr>\n |
| HB<\/td> | 3105<\/td> | 1.41<\/td> | 5330<\/td> | 2.5<\/td> | 5.8<\/td> | 207\u00b0C <\/td> | <\/td>\n<\/tr>\n |
| HB<\/td> | 3300<\/td> | 1.53<\/td> | 9030<\/td> | 2.2<\/td> | 10.5<\/td> | 213\u00b0C <\/td> | Glass fiber 30%<\/td>\n<\/tr>\n |
| Flame retardant<\/td> | CN7000<\/td> | 1.42<\/td> | 2310<\/td> | 11<\/td> | 3.3<\/td> | 64\u00b0C <\/td> | UL approved regrind 50% Inclusive <\/td>\n<\/tr>\n |
| Flame retardant<\/td> | CN7015<\/td> | 1.59<\/td> | 6240<\/td> | 2.3<\/td> | 5.0<\/td> | 205\u00b0C <\/td> | Glass fiber 15% \nUL approved regrind 50% Inclusive <\/td>\n<\/tr>\n |
| Flame retardant \nHigh flow<\/td> | CN7030<\/td> | 1.69<\/td> | 10600<\/td> | 1.9<\/td> | 7.0<\/td> | 207\u00b0C <\/td> | Glass fiber 30%, High flow \nUL approved regrind 50% Inclusive <\/td>\n<\/tr>\n |
| Halogen-free \nFlame retardant<\/td> | 201NF<\/td> | 1.32<\/td> | 2800<\/td> | 1.0<\/td> | 3.0<\/td> | 80\u00b0C <\/td> | <\/td>\n<\/tr>\n |
| Halogen-free \nFlame retardant<\/td> | 301NF<\/td> | 1.40<\/td> | 5000<\/td> | 3.5<\/td> | 4.0<\/td> | 200\u00b0C <\/td> | Glass fiber 10% <\/td>\n<\/tr>\n |
| Halogen-free \nFlame retardant<\/td> | 330NF<\/td> | 1.57<\/td> | 10100<\/td> | 1.7<\/td> | 7.0<\/td> | 214\u00b0C <\/td> | Glass fiber 30% <\/td>\n<\/tr>\n |
| Film, Extrusion molding<\/td> | 700FP<\/td> | 1.31<\/td> | 2440<\/td> | 108<\/td> | 4 (kgf\/cm2)<\/td> | 71\u00b0C <\/td> | MI: 5g\/10min \n235\u00b0C x 2.16kg<\/td>\n<\/tr>\n |
| For Laser welding<\/td> | 730LW<\/td> | 1.49<\/td> | 8010<\/td> | 2.9<\/td> | 11.2<\/td> | 195\u00b0C <\/td> | Glass fiber 30% <\/td>\n<\/tr>\n |
| Low warpage Hydrolysis resistant<\/td> | 733LD<\/td> | 1.46<\/td> | 9000<\/td> | 2<\/td> | 7.6<\/td> | 195\u00b0C <\/td> | Glass fiber 30% <\/td>\n<\/tr>\n |
| Hydrolysis resistant \nHeat shock resistant <\/td> | CG7030<\/td> | 1.48<\/td> | 8100<\/td> | 2.7<\/td> | 13.4<\/td> | 209\u00b0C <\/td> | Glass fiber 30% <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\nDuranex PBT Molding conditions<\/h2>\nThe molding conditions vary for each grade, so please refer to the Grade Molding Condition Sheet for the specific conditions applicable to that grade.<\/p>\n","protected":false},"excerpt":{"rendered":" Brands DURANEX Manufacturer Daicel HPP Characteristics Melting point of 225\u00b0C Easy to mold Excellent heat resistance Low water absorption High dielectric strength (good electrical properties) Good bending creep resistance Resistant to chemicals and solvents Good weather resistance Capable of achieving UL94 V-0 flame retardant rating TDS Duranex PBT Molding conditions The molding conditions vary for …<\/p>\n |