防詐騙提醒
WARNING! WARNING! WARNING! WARNING!
聚太企業 提醒您：
近期發現有心人士以本公司合作之名義，對外尋找攝影及英文主持工作，本公司特此聲明並無此活動提案。
如接獲此合作提案，請諸位提高警戒，避免上當。
TPX
TPX
Brands
Manufacturer
Characteristics
- Transparent with haze value of less than 5%
- Low density (0.83 g/cm³)
- Excellent breathability, about 10 times higher than HDPE
- Good chemical resistance and boiling water resistance
- Melting point of 220°C ~ 240°C
- Excellent surface release properties, with a surface tension of 24mN/m second only to fluororesin
- Does not contain halogens or bisphenol A
Applications:
Release paper, release film, LED modules, molds and tools for thermosetting rubber, microwave food containers, oven paper boxes, cosmetic caps and tubes, soft hoses for laboratory equipment, hollow fibers, and multiple microporous films for PET or PP, and other related applications
TDS Table
| Property | Grade | Yield Stress (MPa) | Tensile Modulus (MPa) | Fractured Strain (%) | MFR (g/10mins) | Vicat (0.45MPa) | Internal Haz (%) | Note |
|---|---|---|---|---|---|---|---|---|
| High-Modulus | RT18 | 28 | 1350 | 32 | 26 | 167°C | 93 | Injection Molding |
| DX845 | 28 | 1480 | 27 | 9 | 167°C | 93 | Film Extrusion | |
| DX820 | -- | 1630 | 3 | 180 | 171°C | 92 | Paper Coating Extrusion | |
| Mid-Modulus | MX004 | 23 | 770 | 29 | 25 | 161°C | 93 | Multiple use |
| Low-Modulus | MX002 | 18 | 430 | 37 | 21 | 151°C | 92 | Multiple use |
| DX310 | 18 | 520 | 38 | 100 | 144°C | 92 | Paper Coating Extrusion |
TPX Injection Molding conditions
Screw temperature : 280°C ~ 300 °C
Mold temperature: 20°C ~ 60 °C
Recommend low speed and low pressure
Mold shrinkage: 1.1% ~ 1.5%