防詐騙提醒
WARNING! WARNING! WARNING! WARNING!
聚太企業 提醒您：
近期發現有心人士以本公司合作之名義，對外尋找攝影及英文主持工作，本公司特此聲明並無此活動提案。
如接獲此合作提案，請諸位提高警戒，避免上當。
TPR(SEBS) – EMPILON
TPR(SEBS) – EMPILON
Brands
EMPILON
Manufacturer
Hotai Group
Point of origin
Taiwan
Characteristics
- Non-slip properties
- Excellent sealing property and shock absorption
- High tensile strength and elongation
- Resistant to hydrolysis and acid and alkali
- Can be briefly immersed in solvents or oil
- Good weather resistance
- Low temperature resistance down to -50°C ~ -55°C
- Excellent electrical properties
- Can be made transparent, heat-resistant, flame-resistant, medical and food safety grade (compliant with FDA), or directly injection molded (with plastics such as PA, ABS, POM, etc.)
Applications:
Handles, sports equipment, food containers, syringe plungers, gaskets, watering hoses, pacifiers, stationery and toys, automotive parts, and more.
TDS Table
| Property | Grade | Hardness | Density (g/cm³) | Tensile strength (kg/cm2) | Strain at break (%) | Note |
|---|---|---|---|---|---|---|
| General | 5 Series | 40A-80A | 1.06-1.11 | 27-128 | 1.1-2.3 | |
| General | 7 Series | 20A-55D | 0.9-1.05 | 14-150 | 0.6-4.8 | |
| General | 6 Series | 20A-55D | 0.88-0.91 | 8-90 | 0.8-5.6 | Transparent/Semi-transparent/Medical/Food grade |
| General | HT Series | 20A-55D | 0.89-0.9 | 50-200 | 0.5-1.7 | High performance Grade |
| Over-molding grade | HA Series | 50A-80A | 1.08-1.1 | 50-133 | 0.7-3.7 | Injection molding: ABS,PC,PA12 Grade |
| Over-molding grade | HD Series | 43A-80A | 1.16-1.19 | 40-90 | 1.1-1.5 | Injection molding: ABS,PC,PA12 Economy Grade |
| Over-molding grade | HC Series | 40A-50A | 0.91-0.92 | 65-70 | 0.2-0.8 | Injection molding: ABS,PC,Transparent Grade |
| Over-molding grade | HNT Series | 50A-90A | 1.17-1.2 | 30-45 | 0.7-2.3 | Injection molding: PA,PA/ABS Grade |
| Over-molding grade | HB Series | 50A-90A | 1.15 | 30 | - | Injection molding: POM,PBT,CA Grade |
Molding conditions
The pre-drying conditions vary for each grade, so please refer to the Grade Molding Condition Sheet for the specific conditions applicable to that grade.
The melt temperature varies for each grade, so please refer to the Grade Molding Condition Sheet for the specific conditions applicable to that grade.
Mold temperature: 40°C~50°C
Over-molding comparison chart:
| HA | HD | HC | HNT | HB | |
|---|---|---|---|---|---|
| PC | ✔️ | ✔️ | ✔️ | ||
| ABS | ✔️ | ✔️ | ✔️ | ||
| PC/ABS | ✔️ | ✔️ | ✔️ | ||
| PMMA | ✔️ | ||||
| PA(Nylon) | ✔️(PA12) | ✔️ | |||
| Triton | ✔️ | ✔️ | |||
| PETG | ✔️ | ||||
| SAN | ✔️ | ✔️ | |||
| POM, PBT | ✔️ |