防詐騙提醒
WARNING! WARNING! WARNING! WARNING!
聚太企業 提醒您：
近期發現有心人士以本公司合作之名義，對外尋找攝影及英文主持工作，本公司特此聲明並無此活動提案。
如接獲此合作提案，請諸位提高警戒，避免上當。
PPS
PPS
Brands
DURAFIDE
Manufacturer
Polyplastics Ltd.
Characteristics
- High mechanical strength
- Excellent resistance to creep under high temperature and pressure
- Fatigue resistance
- Good chemical resistance
- Suitable for hot welding (260°C/10 seconds)
- Suitable as electrical insulating material
- Good for secondary processing
Applications
Connectors, electronic component sockets, relay housings, and car headlight reflector bases, among other related applications.
TDS
| Property | Grade | Density (g/cm3) | Tensile strength (MPa) | Strain at break (%) | Flexural modulus (MPa) | Charpy notched impact strength (KJ/m2) | HDT (1.8 MPa) | UL | Note |
|---|---|---|---|---|---|---|---|---|---|
| Reinforced | 1140A6 | 1.66 | 210 | 1.9 | 14000 | 11 | 270°C | V-0 | Glass fiber 40% |
| Reinforced Mold at low temp | 6565A7 | 1.89 | 130 | 1.1 | 17800 | 5 | 275°C | V-0 | Glass fiber /Mineral filler 60% Mold temp 100°C |
| Low Chlorine | 1140A66 | 1.66 | 185 | 1.7 | 13200 | 9 | 265°C | V-0 | Chlorine<900 ppm |
| Dimensionally precise | 6165A6 | 1.98 | 130 | 1.1 | 18300 | 4.5 | 270°C | V-0 | Glass fiber /Mineral filler 65% |
| 6165A7 | 1.89 | 155 | 1.2 | 17300 | 5.5 | 270°C | V-0 | Glass fiber /Mineral filler 65% | |
| Low warpage | 6345A4 | 1.68 | 155 | 1.8 | 10300 | 8.5 | 265°C | V-0 | Glass fiber 30%+PTFE |
Molding conditions
The molding conditions vary for each grade, so please refer to the Grade Molding Condition Sheet for the specific conditions applicable to that grade.