防詐騙提醒
WARNING! WARNING! WARNING! WARNING!
聚太企業 提醒您：
近期發現有心人士以本公司合作之名義，對外尋找攝影及英文主持工作，本公司特此聲明並無此活動提案。
如接獲此合作提案，請諸位提高警戒，避免上當。
TPEE
TPEE
Brands
SHINITE
Manufacturer
SHINKONG
Point of origin
Taiwan
TDS
| Property | Grade | Density (g/cm3) | Hardness (Shore D) | Strain at break (%) | Flexural modulus (kg/cm2) | Izod notch impact strength (MPa) | Note |
|---|---|---|---|---|---|---|---|
| General | 4000DH | 1.15 | 42 | 700 | 900 | NB (23°C ) NB (-40°C ) | 20kg/bag |
| General | 5525DH | 1.2 | 53 | 545 | 2050 | NB (23°C ) NB (-40°C ) | 25kg/bag |
| High viscosity | DH550H | 1.19 | 53 | 590 | 1750 | NB (23°C ) NB (-40°C ) | Extrusion grade |
| General | DH6000 | 1.23 | 60 | 475 | 3100 | NB (23°C ) 23 (-40°C ) | |
| High viscosity | DH600H | 1.23 | 60 | 475 | 2900 | NB (23°C ) 23 (-40°C ) | Extrusion grade |
| General | 7200DH | 1.27 | 74 | 405 | 7410 | 22 (23°C ) 7 (-40°C ) |
The molding conditions vary for each grade, so please refer to the Grade Molding Condition Sheet for the specific conditions applicable to that grade.
Flexural modulus : 1 kg/cm2 = 0.0981 MPa
In addition to the above products, we also carry TPEE Shore 30D or 40D blow molding grade in our inventory. If you would like to learn more about these items, please don’t hesitate to contact us for additional details.